FREQUENTLY ASKED QUESTIONS
FREQUENTLY ASKED QUESTIONS
No Water
- Possible causes: ants, bad breaker, or power problems.
- Locate the control center. Check power to pressure switch located at pressure tank above the pressure gauge.
- Check overloads under control box; you should have 1 or 2 red overload buttons that can be tripped to restart the pump and motor.
Low Pressure
- If you have low pressure at the house, check water pressure at the well. If pressure is low at the well, then you probably need a service call.
- If you have low pressure at the house, but good pressure at the well, then check any in-lone filters you have between the house and well.
Water Spraying
- If water is spraying out of pop-off valve at the top of the well-head, then turn the power off and call for service.
PLEASE CALL US AT 512.756.4077 IF YOU HAVE ANY QUESTIONS REGARDING THE PROCEDURES